TJ140 series
Thumb-type dual-axis operating handle
Product Features
● Thumb operation
● Spring return
● Dual-axis operation at any angle in any direction.
● Hall contactless detection
● A variety of handles can be selected
● Switching output optional
Application
This series of products is mainly used in various operation handles, operation panels, and satellite remote control.
Technical Information
Electrical parameters
| Power supply current | 5 ± 0.5Vdc |
| Electrical angle | ± 25 ° |
| Maximum supply current | 10mA |
| Median output voltage | 2.5 ± 0.1V |
| Linear error of output voltage | ＜ ± 0.2V |
| Limit allowable overvoltage | 30Vdc |
| Reverse limit allowable voltage | -15Vdc |
Mechanical parameters
| Rocking angle | ± 25 ° |
| Mode of operation | Automatic spring return |
| Starting force | about 2N |
| Operating force | about 5N |
| Limiting force | about 100N |
| Service life | > 1 million times |
| Weight | about 18g |
Environmental parameters
| Working temperature | -30 ℃ ~ + 70 ℃ |
| Storage temperature | -40 ℃ ~ + 85 ℃ |
| Protection grade | IP68 (above the installation panel) |
Product Configuration
TJ140 series
Operation method
| 1A | Single axis operation in front and back direction |
| 2AC | any operation direction of dual axes (with guide groove |
Output signal
| 2H51 | Dua-Hall type, 0.5 ~ 2.5 ~ 4.5Vand 4.5~2.5~0.5V voltage output |
| SW | switch output |