LT76 series
Grip-type multi-axis operating handle
애플리케이션
This series of products are mainly used in aerial work platforms.
기술 정보
전기 매개변수
Hall type
Power supply voltage 5±0.5Vdc
Power supply current (rated power supply current) <11mA (single axis), 22mA (double axis)
Limit allowable overvoltage 20Vdc
역방향 제한 허용 전압 -10Vdc
Output voltage linearity error <±0.1V
기계적 매개 변수
Swing angle ±20°
작동 모드: 스프링 자동 리셋
Starting force 5N
Maximum operating force 11N
Limiting force >300N
Service life> 2 million times
Weight 450g (without upper end)
환경 매개 변수
Working temperature -30C~+70℃
보관 온도 -40℃~+85℃
Protection grade IP65 (above installation panel)
제품 구성
LT76 series
작동 방법
1A (Single-axis front and rear operation)
2AP (two-axis cross operation direction)
2AC (two-axis arbitrary operation direction)
output signal
Hall type (power supply voltage 5VDC)
H51 (Single Hall, 0.5~2.5~4.5Vdc voltage output)
H52 (Single Hall, 0~2.5~5Vdc voltage output)
H53 (Single Hall, 1.25~2.5~3.75Vdc voltage output)
H54 (Single Hall, 1.0~2.5~4.0Vdc voltage output)
H55 (Single Hall, 1.15~2.5~3.85Vdc voltage output)
손잡이 상단
KSDR (with safety switch, rocker button)
※Optional SS series, HB series, KM series handle
Way out
L Direct outlet
A connector outlet
※Other connector outlet forms can be customized
Electrical installation
Electrical Connections
Direct outlet (single shaft, with rocker and safety switch on the upper end)
스레드 색상 기능
White VCC
Black GND
Gray electrical output in front and rear directions
Yellow left rocker
Purple right rocker
Brown rocker and safety switch common
Red safety switch