TJ120 series
Fingertip single axis operating handle
製品の特徴
Single-axis fingertip handle for front and back operation.
The spring automatically resets.
It is compact and easy to install.
The angle detection unit is a potentiometer or a non-contact Hall sensor.
Different output voltage ranges can be selected according to needs.
適用範囲
This series of products are mainly used in industrial remote controls, control panels of various engineering vehicles or industrial machinery and equipment.
技術情報
電気パラメーター
ポテンショメーター式
| 電源電圧 | <32Vdc |
| 全抵抗値 | 4KQ or 5KΩ |
| Resistance error | <20% |
| 電気角 | ± 28 ° |
| 中央不感帯角度 | ± 2.5 ° |
| Potentiometer maximum power consumption | 0.25W (25 ℃, no load) |
| 出力電圧の中央値 | 48% ~ 52% (± 2%) |
| Direction switch Power supply voltage | <35Vdc |
| 最大電流 | 2mA |
機械的パラメータ
| Shake angle about | ± 30 ° |
| 動作モード | 自動スプリング・リターン |
| スターティングフォース | 1.3N |
| 最大操作力 | 3N |
| 制限力 | > 50N |
| 耐用年数 | > 200万回（ポテンショメーター式） |
| > 500万回（ホールタイプ） | |
| 重量 | 45g |
環境パラメーター
| 使用温度 | -30 ℃ ~ + 70 ℃ |
| 保存温度 | -40 ℃ ~ + 85 ° ℃ |
| Protection class | IP50 (above the installation panel) |
製品選択
TJ120 Series
出力信号
[Potentiometer type (power supply voltage is less than 32Vdc)
| P041 | 4KQ potentiometer, 0% ~ 100% Vdc voltage output, front and back direction switch |
| P052 | 5KQ potentiometer, 10% ~ 90% Vdc voltage output, front and back direction switch |
| P053 | 5KQ potentiometer, 25% ~ 75% Vdc voltage output, front and back direction switch |
電気設備
Wiring plug (MOLEX 50579407-1 seven-pin connector)
Pin Electrical position type Thread color
| A Potentiometer center tap red |
| B Supply voltage blue |
| C Potentiometer sliding output voltage black |
| D OV white |
| E Direction switch (Y-) Yellow |
| Direction switch (Y +) green |
| G direction open public close end gray |