LT30 series Grip type multi-axis operating handle
製品の特徴
Spring automatically resets, single-axis or dual-axis operation.
You can choose to operate in the cross direction or in any direction.
The angle detection device is a potentiometer or Hall sensor, which has a long service life.
Configurable high current micro switch (10A @ 30Vdc).
Various output formats are available.
Can be configured with a variety of models
適用範囲
This series of products are mainly used in aerial work trucks, rotary drilling rigs, aerial fire trucks, cranes, shield machines and other electrical and electro-hydraulic control systems.
技術情報
電気パラメーター
ポテンショメーター式
| 電源電圧 | <36Vdc |
| 全抵抗値 | 5KΩ, 10KΩ |
| Center dead zone angle | ± 3 ° |
| Maximum power | 0.2W |
ホールタイプ
| Power supply voltag | e5 ± 0.5Vdc |
| 許容過電圧の制限 | 20Vdc |
| 逆限界許容電圧 | -10Vdc |
| 出力電圧の線形誤差 | <± 0.2V |
変換回路付き
| 電源電圧 | 18 ~ 36Vdc (U 21 ~ U 24) |
| 消費電流 | <20mA |
| 最大出力電流 | 10mA（標準電圧出力時） |
マイクロスイッチ
| 負荷容量 | 10A@30Vdc（抵抗負荷） |
| 耐用年数 | > 30 million times or more (mechanical) |
| > 200,000 times (electrical) | |
| 絶縁抵抗 | 100MΩ or more (500Vdc insulation resistance meter) |
| スタート角度 | ± 3 ° ~ ± 5 ° |
機械的パラメータ
| ロッキング角度 | ± 25 ° |
| 動作モード | 自動スプリング・リターン |
| スターティングフォース | 5N |
| 最大操作力 | 30N |
| 制限力 | ＞300N |
| 耐用年数 | ＞2 million times (potentiometer type) |
| 5＞ million times (Hall type) | |
| 重量 | 460g (no upper end) |
環境パラメーター
| 使用温度 | -30 ℃ ~ + 70 ℃ |
| 保存温度 | -40 ℃ ~ + 85 ℃ |
| 保護等級 | IP65（設置パネル上部） |
製品選択
LT30 series
操作方法
| 1A | Single-axis front-back operation |
| 2AP | Dual axis cross operation direction |
| 2AC | any operation direction of two axes |
マイクロスイッチ
| MS00 | マイクロスイッチなし |
| MS22 | 10A 前後位置マイクロスイッチ付き |
| MS23 | with 10A neutral position normally closed and front and back position micro switch |
出力信号
Potentiometer type | (supply voltage <36VDC)
| P051 | 5KΩ center tapped potentiometer |
| P101 | 10kΩ center tapped potentiometer |
Hall type (supply voltage 5VDC)
| H51 | 0.5 ~ 2.5 ~ 4.5Vdc voltage output |
| H52 | 0 ~ 2.5 ~ 5Vdc voltage output |
| H53 | 1.25V ~ 2.5V ~ 3.75Vdc voltage output |
変換回路付き
| U21 | 電源電圧 18 ~ 36Vdc、-10V ~ 0V ~ + 10V 電圧出力 |
| U22 | power supply voltage 18 ~ 36Vdc, + 10V ~ 0V ~ + 10V voltage output |
| U23 | 電源電圧 18 ~ 36Vdc、-5V ~ 0V ~ + 5V電圧出力 |
| U24 | power supply voltage 18 ~ 36Vdc, + 5V ~ 0V ~ + 5V voltage output |
| I21 | 電源電圧9～36Vdc、2線式4mA～12mA～20mA電流出力 |
| I22 | power supply voltage 9 ~ 36Vdc, two-wire system 20mA ~ 4mA ~ 20mA current output |
| I41 | power supply voltage 9 ~ 36Vdc, four-wire 4mA ~ 12mA ~ 20mA current output |
| I42 | power supply voltage 9 ~ 36Vdc, four-wire 20mA ~ 4mA ~ 20mA current output |
| NA | no analog signal output |
ハンドル上端
| BG | upper end of BG type handle, top palm operation |
| ホーム | upper end of HA type handle, no button on top |
| ハス | the upper end of the HAS-type handle with buttons on the top |
| HD | upper end of HD handle, no button on top |
| エイチディーエス | upper end of HDS type handle, with button on top |
| HDR | upper end of HDR type handle, seesaw on top |
| KG DR | with safety switch and rocker button |
| KG DN | with safety switch, without rocker button |
往路
| C | terminal block |
| A | AMPコネクター |