TJ120 series
Fingertip single axis operating handle
Caractéristiques du produit
Single-axis fingertip handle for front and back operation.
The spring automatically resets.
It is compact and easy to install.
The angle detection unit is a potentiometer or a non-contact Hall sensor.
Different output voltage ranges can be selected according to needs.
Domaine d'application
This series of products are mainly used in industrial remote controls, control panels of various engineering vehicles or industrial machinery and equipment.
Informations techniques
Paramètres électriques
Potentiometer type
| Tension d'alimentation | <32Vdc |
| Total resistance value | 4KQ or 5KΩ |
| Resistance error | <20% |
| Electrical angle | ± 28 ° |
| Median dead zone angle | ± 2.5 ° |
| Potentiometer maximum power consumption | 0.25W (25 ℃, no load) |
| Tension de sortie médiane | 48% ~ 52% (± 2%) |
| Direction switch Power supply voltage | <35Vdc |
| Courant maximum | 2mA |
Paramètres mécaniques
| Shake angle about | ± 30 ° |
| Mode de fonctionnement | Retour automatique par ressort |
| Force de démarrage | 1.3N |
| Force maximale de fonctionnement | 3N |
| Force de limitation | > 50N |
| Durée de vie | > 2 million times (potentiometer type) |
| > 5 million times (Hall type) | |
| Poids | 45g |
Paramètres environnementaux
| Température de travail | -30 ℃ ~ + 70 ℃ |
| Température de stockage | -40 ℃ ~ + 85 ° ℃ |
| Classe de protection | IP50 (above the installation panel) |
Sélection des produits
TJ120 Series
Signal de sortie
[Potentiometer type (power supply voltage is less than 32Vdc)
| P041 | 4KQ potentiometer, 0% ~ 100% Vdc voltage output, front and back direction switch |
| P052 | 5KQ potentiometer, 10% ~ 90% Vdc voltage output, front and back direction switch |
| P053 | 5KQ potentiometer, 25% ~ 75% Vdc voltage output, front and back direction switch |
Electrical Installations
Wiring plug (MOLEX 50579407-1 seven-pin connector)
Pin Electrical position type Thread color
| A Potentiometer center tap red |
| B Supply voltage blue |
| C Potentiometer sliding output voltage black |
| D OV white |
| E Direction switch (Y-) Yellow |
| Direction switch (Y +) green |
| G direction open public close end gray |