TJ1 series
Fingertip single axis operating handle
Domaine d'application
This series of products are mainly used in industrial remote controls, control panels of various engineering vehicles or industrial machinery and equipment.
Technical parameters Technical lnformation
Electrical Specification
Potentiometer type
Tension d'alimentation | <32Vdc |
Total resistance value | 4KQ or 5KQ |
Resistance error | <20% |
Electrical angle | ± 28 ° |
Median dead zone angle | ± 2.5 ° |
Potentiometer maximum power consumption | 0.25W (25 ℃, no load) |
Tension de sortie médiane | 48% ~ 52% (± 2%) |
Direction switch Power supply voltage | <35Vdc |
Courant maximum | 2mA |
Starting angle | ± 3 ° |
Contact resistance | <500Q |
Type de salle
Tension d'alimentation | 5,0 ± 0,5 Vcc |
Courant d'alimentation | <9mA; 18mA (dual Hall) |
Limit allowable voltage | 30Vdc |
Tension admissible de la limite inverse | -15Vdc |
Résistance à la charge | > 10KQ |
Tension de sortie médiane | 2.5 ± 0.2V |
Output voltage linear error | <± 5% |
Paramètres mécaniques
Shake angle about | ± 30 ° |
Mode de fonctionnement | Retour automatique par ressort |
Force de démarrage | 1.3N |
Force maximale de fonctionnement | 3N |
Force de limitation | > 50N |
Durée de vie | > 2 million times (potentiometer type) |
> 5 million times (Hall type) | |
Poids | 45g |
Paramètres environnementaux
Température de travail | -30 ℃ ~ + 70 ℃ |
Température de stockage | -40 ℃ ~ + 85 ℃ |
Niveau de protection | IP66 (above the installation panel) |
Sélection des produits
TJ1 series
Signal de sortie
[Potentiometer type] (Power supply voltage is less than 32Vdc)
P041 4KQ potentiometer, 0% ~ 100% Vdc voltage output, front and back direction switch
P052 5KQ potentiometer, 10% ~ 90% Vdc voltage output, front and back direction switch
P053 5KQ potentiometer, 25% ~ 75% Vdc voltage output, front and back direction switch
Type Hall (tension d'alimentation 5Vdc)
H51 single Hall, 0.5 ~ 2.5 ~ 4.5Vdc voltage output
H52 single Hall, 0 ~ 2.5 ~ 5.0Vdc voltage output
H53 single Hall, 1.25 ~ 2.5 ~ 3.75Vdc voltage output
2H51 redundant Hall, 0.5 ~ 2.5 ~ 4.5Vdc and 4.5 ~ 2.5 ~ 0.5Vdc voltage output
2H52 redundant Hall, 0 ~ 2.5 ~ 5Vdc and 5 ~ 2.5 ~ 0Vdc voltage output
2H53 redundant Hall, 1.25 ~ 2.5 ~ 3.75Vdc and 3.75 ~ 2.5 ~ 1.25Vdc voltage output
Electrical Installations
Wiring plug (FCI DU BOX TM 7-way male connector 76382-307)
Pin Electrical position type Hall type Redundant Hall thread color
A Potentiometer neutral center tap empty A out red
B Supply voltage Supply voltage Supply voltage Blue
C Potentiometer sliding output voltage Bout Bout black
D OV OV OV white
E Direction switch (X +) empty empty yellow
F direction switch terminal (X-) empty empty green
G direction open public close end empty empty gray