TJ120 series
Fingertip single axis operating handle
Características del producto
Single-axis fingertip handle for front and back operation.
The spring automatically resets.
It is compact and easy to install.
The angle detection unit is a potentiometer or a non-contact Hall sensor.
Different output voltage ranges can be selected according to needs.
Application range
This series of products are mainly used in industrial remote controls, control panels of various engineering vehicles or industrial machinery and equipment.
Información técnica
Parámetros eléctricos
Potentiometer type
| Tensión de alimentación | <32Vdc |
| Total resistance value | 4KQ or 5KΩ |
| Resistance error | <20% |
| Ángulo eléctrico | ± 28 ° |
| Median dead zone angle | ± 2.5 ° |
| Potentiometer maximum power consumption | 0.25W (25 ℃, no load) |
| Tensión de salida media | 48% ~ 52% (± 2%) |
| Direction switch Power supply voltage | <35Vdc |
| Maximum current | 2mA |
Parámetros mecánicos
| Shake angle about | ± 30 ° |
| Modo de funcionamiento | Retorno automático por muelle |
| Fuerza de arranque | 1.3N |
| Fuerza máxima de funcionamiento | 3N |
| Fuerza limitadora | > 50N |
| Vida útil | > 2 millones de veces (tipo potenciómetro) |
| > 5 millones de veces (tipo Hall) | |
| Peso | 45g |
Parámetros medioambientales
| Temperatura de trabajo | -30 ℃ ~ + 70 ℃ |
| Temperatura de almacenamiento | -40 ℃ ~ + 85 ° ℃ |
| Protection class | IP50 (above the installation panel) |
Selección de productos
TJ120 Series
Señal de salida
[Potentiometer type (power supply voltage is less than 32Vdc)
| P041 | 4KQ potentiometer, 0% ~ 100% Vdc voltage output, front and back direction switch |
| P052 | 5KQ potentiometer, 10% ~ 90% Vdc voltage output, front and back direction switch |
| P053 | 5KQ potentiometer, 25% ~ 75% Vdc voltage output, front and back direction switch |
Instalaciones eléctricas
Wiring plug (MOLEX 50579407-1 seven-pin connector)
Pin Electrical position type Thread color
| A Potentiometer center tap red |
| B Supply voltage blue |
| C Potentiometer sliding output voltage black |
| D OV white |
| E Direction switch (Y-) Yellow |
| Direction switch (Y +) green |
| G direction open public close end gray |