TJ1 series
Fingertip single axis operating handle
Application range
This series of products are mainly used in industrial remote controls, control panels of various engineering vehicles or industrial machinery and equipment.
Technical parameters Technical lnformation
Electrical Specification
Potentiometer type
| Tensión de alimentación | <32Vdc |
| Total resistance value | 4KQ or 5KQ |
| Resistance error | <20% |
| Ángulo eléctrico | ± 28 ° |
| Median dead zone angle | ± 2.5 ° |
| Potentiometer maximum power consumption | 0.25W (25 ℃, no load) |
| Tensión de salida media | 48% ~ 52% (± 2%) |
| Direction switch Power supply voltage | <35Vdc |
| Maximum current | 2mA |
| Starting angle | ± 3 ° |
| Contact resistance | <500Q |
Tipo de sala
| Tensión de alimentación | 5.0 ± 0.5Vdc |
| Corriente de alimentación | <9mA; 18mA (dual Hall) |
| Limit allowable voltage | 30 Vcc |
| Límite inverso de tensión admisible | -15Vcc |
| Load resistance | > 10KQ |
| Tensión de salida media | 2.5 ± 0.2V |
| Output voltage linear error | <± 5% |
Parámetros mecánicos
| Shake angle about | ± 30 ° |
| Modo de funcionamiento | Retorno automático por muelle |
| Fuerza de arranque | 1.3N |
| Fuerza máxima de funcionamiento | 3N |
| Fuerza limitadora | > 50N |
| Vida útil | > 2 millones de veces (tipo potenciómetro) |
| > 5 millones de veces (tipo Hall) | |
| Peso | 45g |
Parámetros medioambientales
| Temperatura de trabajo | -30 ℃ ~ + 70 ℃ |
| Temperatura de almacenamiento | -40 ℃ ~ + 85 ℃ |
| Grado de protección | IP66 (above the installation panel) |
Selección de productos
TJ1 series
Señal de salida
[Potentiometer type] (Power supply voltage is less than 32Vdc)
P041 4KQ potentiometer, 0% ~ 100% Vdc voltage output, front and back direction switch
P052 5KQ potentiometer, 10% ~ 90% Vdc voltage output, front and back direction switch
P053 5KQ potentiometer, 25% ~ 75% Vdc voltage output, front and back direction switch
Hall type (supply voltage 5Vdc)
H51 single Hall, 0.5 ~ 2.5 ~ 4.5Vdc voltage output
H52 single Hall, 0 ~ 2.5 ~ 5.0Vdc voltage output
H53 single Hall, 1.25 ~ 2.5 ~ 3.75Vdc voltage output
2H51 redundant Hall, 0.5 ~ 2.5 ~ 4.5Vdc and 4.5 ~ 2.5 ~ 0.5Vdc voltage output
2H52 redundant Hall, 0 ~ 2.5 ~ 5Vdc and 5 ~ 2.5 ~ 0Vdc voltage output
2H53 redundant Hall, 1.25 ~ 2.5 ~ 3.75Vdc and 3.75 ~ 2.5 ~ 1.25Vdc voltage output
Instalaciones eléctricas
Wiring plug (FCI DU BOX TM 7-way male connector 76382-307)
Pin Electrical position type Hall type Redundant Hall thread color
A Potentiometer neutral center tap empty A out red
B Supply voltage Supply voltage Supply voltage Blue
C Potentiometer sliding output voltage Bout Bout black
D OV OV OV white
E Direction switch (X +) empty empty yellow
F direction switch terminal (X-) empty empty green
G direction open public close end empty empty gray