TJ140 series
Thumb-type dual-axis operating handle
Produktmerkmale
● Thumb operation
● Spring return
● Dual-axis operation at any angle in any direction.
● Hall contactless detection
● A variety of handles can be selected
● Switching output optional
Anmeldung
This series of products is mainly used in various operation handles, operation panels, and satellite remote control.
Technical Information
Electrical parameters
| Power supply current | 5 ± 0,5 Vdc |
| Electrical angle | ± 25 ° |
| Maximum supply current | 10mA |
| Median output voltage | 2.5 ± 0.1V |
| Linearer Fehler der Ausgangsspannung | ＜ ± 0.2V |
| Begrenzung der zulässigen Überspannung | 30Vdc |
| Umgekehrter Grenzwert der zulässigen Spannung | -15Vdc |
Mechanical parameters
| Rocking angle | ± 25 ° |
| Arbeitsweise | Automatic spring return |
| Startkraft | about 2N |
| Operating force | about 5N |
| Begrenzende Kraft | about 100N |
| Service life | > 1 million times |
| Gewicht | about 18g |
Environmental parameters
| Arbeitstemperatur | -30 ℃ ~ + 70 ℃ |
| Lagertemperatur | -40 ℃ ~ + 85 ℃ |
| Schutzgrad | IP68 (above the installation panel) |
Product Configuration
TJ140 series
Operation method
| 1A | Single axis operation in front and back direction |
| 2AC | any operation direction of dual axes (with guide groove |
Ausgangssignal
| 2H51 | Dua-Hall type, 0.5 ~ 2.5 ~ 4.5Vand 4.5~2.5~0.5V voltage output |
| SW | switch output |